How to re-load the GrassGator 4620
Find the release button on the side of the GrassGator head.
Push and hold it while turning the center plate of the head counterclockwise until the blades and pins are exposed.
Remove the worn blades from the steel pins and replace with new blades.
Doesn't matter which side (flat or beveled) is facing up as long as all the blades are facing the same way.
Release the button
The center plate of the head should snap back into place, locking the blades into the head with a click. If you don't hear the click manually rotate the plate clockwise until it snaps in place.
Make sure the line and arrow on the side of the head align
The pins and blades should be secure and covered by the center plate before starting your trimmer again.
Copyright © CMD Products All Rights Reserved